Maximum:.0GB (DDR or sdram i/O interface, supports Plug and Play function.
PCI slot ( Peripheral Component InterConnect used for connecting PCI cards, which are much faster than ISA cards and run on 32 bits AGP slot ( Accelerated Graphic Port A fast port for a graphics card.
It corresponds to a network card integrated into the motherboard; VGA connector (called SUB-D15 for connecting a monitor.
The connection device on an ATX motherboard is designed xserve expansion slots to make plugging in peripherals as easy as possible (for example, the.Network Interface Cards (NICs) edit.A network interface card can be a network card, network adapter, LAN Adapter or NIC (network interface card).When the computer is turned on again, the system is still on the right time.At a minimum it connects a CPU and memory.Supports 360K2.88M Byte, 3 mode FDDs or LS120.Maybe its on the floor or on top of a big desk, but it might be in a rack, on a shelf, share a small desk with other accoutrements of a typical office worker, or be placed somewhere that puts practical limits on size.This means that an 800 MHz processor can carry out 800 million operations per second.The various connectors (memory slots, expansion slots) are aligned in parallel, in the direction in which air circulates.
PCI Express slot ( Peripheral Component InterConnect Express Faster bus architecture than AGP and PCI buses.
The BTX standard defines three formats: BTX standard, with standard dimensions of 325x267 mm; micro-BTX, with small dimensions (264x267 mm pico-BTX, with much smaller dimensions (203x267 mm).
The big difference will be what happens in two or three years.
These are cards which give the computer new features or increased performance.AMR slot ( Audio Modem Riser This type of slot is used for connecting mini-cards to PCs which are built for.Laptops have a different style of expansion slot called a pcmcia slot.June 2017, introduction to motherboards, the primary component of a computer is the motherboard (sometimes called the " mainboard.Since the processor releases heat, it is necessary to dissipate it, to keep the circuits from melting.